Skip to content

Free estimate, workmanship warranty on eligible projects

(972) 779-6363
(972) 779-6363

ServicesResidential Roofing

Residential Roofing in Murphy, TX

We put new shingle roofs on homes and lay out the full scope on paper before work begins: tear-off, decking, underlayment, flashing, ventilation and shingles. You see what you are paying for, line by line, and the price you approve is the price you pay.

Roofer in a yellow safety harness kneeling on a brick house roof, nailing brown architectural shingles over gray underlayment with a pneumatic nail gun

A new roof, explained before it is built

Residential roofing is the full system that keeps weather out of your home, not just the shingles you see from the street. Underneath sit the wood decking, a water-resistant underlayment, metal flashing at every wall and chimney, and vents that let attic heat escape. When those parts are planned together, the roof lasts and your attic stays cooler.

Most surprise charges on a roofing job come from things nobody mentioned up front, usually rotted decking found after tear-off. We talk about that possibility before you sign. Your written quote lists the work, the materials, and how any damaged decking would be priced if we find it, so there is nothing new to negotiate halfway through the day.

What comes with your new roof

Tear-off to the bare deck

We strip off all the old shingles and tired underlayment until nothing but wood decking remains. Laying new shingles over old ones adds weight and hides problem areas, so your new roof starts on a clean deck.

Deck inspection and board replacement

Once the deck is exposed, we check for soft, delaminating or water-stained boards. Your estimate gives a per-sheet price for replacing them, so you have that figure before tear-off starts.

Full underlayment and valley leak barrier

The whole deck gets synthetic underlayment. In the valleys and around pipes and vents we add a self-sticking membrane, since those spots gather water and are where most leaks start.

Fresh flashing and drip edge

We install new metal at walls, chimneys, valleys and roof edges. Old flashing causes a lot of slow leaks, and reusing it on a new roof rarely pays off.

Attic ventilation sized to fit

We check the eave intake vents and the ridge exhaust and size them so air flows through evenly. In a North Texas summer, good attic airflow extends shingle life and takes load off your air conditioner.

Shingle install, cleanup and walkthrough

New architectural shingles go on following the manufacturer's instructions. We run magnetic sweepers across the yard and driveway for nails, haul away the debris and walk the finished roof with you.

When it may be time for a new roof on your home

  • Dark grit where downspouts empty

    Asphalt shingles carry a coat of mineral granules that shield them from the sun. If you see that grit collecting on the ground at the bottom of your downspouts, the shingles are losing their protection.

  • Shingles that curl or cup

    When the edges turn upward or the middle sinks into a bowl, years of sun have usually baked the shingles dry. They catch the wind more easily and no longer bond to the row below.

  • Stains on the ceiling or in the attic

    Brown rings on a ceiling, or dark spots on the attic decking, mean water is getting past the roof. Look up there with a flashlight after a heavy rain.

  • Missing shingles after a windy day

    One loose tab can be a fluke. Shingles letting go in several spots tells us the seal strips have failed across the roof.

  • A sagging line or soft spot

    A roofline that dips or decking that feels spongy underfoot points to moisture in the wood. That deserves a look soon, before it spreads to rafters.

How a roofing project runs, start to finish

  1. 1

    Free estimate at your home

    We visit, walk the roof, look in the attic if you're comfortable with that, and photograph what we see. You get a straight answer on whether your home needs a new roof now or whether it can wait.

  2. 2

    Your line-item breakdown

    You receive a written quote that covers materials, labor, decking pricing, permits and disposal. We go over it together by phone, and you're free to take your time and ask questions before you say yes.

  3. 3

    Scheduling and permit

    After you approve, we pull the permit the city requires and pick a date with the forecast in mind. You'll know the day, the crew's arrival time and where the dumpster or trailer will be parked.

  4. 4

    Installation day

    We shield your landscaping and driveway first, then tear off, check the deck and build the new roof. Size and weather set the pace, but a typical house takes us one or two days from tear-off to the last ridge cap.

  5. 5

    Cleanup and walkthrough

    We sweep for nails, clear the debris and walk the property with you. If the final invoice differs from the quote at all, it will only be for something you already signed off on in writing.

What affects the price of your roof

No two roofs measure or wear the same way, so we won't name a number over the phone before seeing yours. What we can do is show you exactly what moves the price. Each item below gets its own line in your written quote.

Roof size and pitch
Total square footage sets the material count. Steeper roofs need more safety setup and take longer to work, which affects labor.
Complexity of the roofline
Valleys, dormers, skylights and multiple levels each add flashing and cutting. A simple gable goes faster than a roof with many angles.
Condition of the decking
Sound decking adds nothing. Damaged sheets are priced per sheet, and we give you that rate in writing before tear-off begins.
Shingle choice and ventilation upgrades
Architectural shingles come in different grades, and some homes need added ridge or soffit vents. We lay out the options side by side so you can choose.
Layers to remove and permits
A second layer of old shingles means more labor and disposal. Permit fees are listed separately so you can see them.

Questions about residential roofing

Something not covered here? (972) 779-6363

What keeps the price from climbing after tear-off?

For most roofs, the only unknown is rotted decking under the old shingles. Your quote fixes a per-sheet price for it up front. If we find bad boards, you get photos and a count of sheets. No other charge is added without your agreement.

Is the work warrantied?

Yes. Our workmanship warranty covers eligible projects, and what it covers differs by service. During the estimate visit we go over the coverage for your roof, so you know it before deciding.

Do I have to stay home while the roof goes on?

Not for the whole day. We like to meet you in the morning and again at the final walkthrough. Tear-off is noisy, so park on the street and remove pictures or shelves from walls close to the attic.

Will you help with my insurance claim?

We can walk you through how claims usually proceed and hand you photos and a written scope to pass to your adjuster. Your adjuster decides what the policy pays for. Our price stays the same regardless of the claim, so comparing the two is simple.

Will you come to towns beyond Murphy?

Yes. We roof houses in Murphy and close-by towns such as Wylie, Sachse, Parker, Plano and Allen. You get the same free estimate and line-by-line price in every one of them.

See your roof's full scope before anything starts

Tell us a little about your home and we will set a time to come out. You get a free estimate and a line-by-line price before any work begins.